- Brand new in original box, never been tried on & used
- Exactly the same as picture !
- Comes one set of cold air intake kit + 2 piece of black cold air intake pipe sock cover with Spec-D logo
- Cold air intake
- Made of high quality aircraft aluminum
- Replaces your existing stock rubber intake pipes
- Provide better throttle response & stop sucking in hot air from high temperature engine component
- Increase 15-20 horsepower
- Better fuel mileage with improved combustion
- This kit comes with aluminum intake pipes, blue cone air filter, mounting brackets, vacuum hoses, reducers, & all necessary hardware
- Professional installation is highly recommended
- Intake pipe cover
- Made of high quality 100% polyester
- Pipe sock cover size: 7" length x 3.95" width
- Fits from 2" up to 4" diameter intake pipe
- Reduce engine bay heat and promotes a cooler, denser, more powerful air charge
- Block dust, dirt or any debris
- To dress up your engine bay with stylish look
- Easy to put on and remove for install
Make your pick from K2 Motor's wide selection of top quality 1996-1998 Honda Civic Blue Filter Cold Air Intake + Black Short Arm Sockoffered to you at the BEST DEALS!
Vehicle Fitment :
1998 Honda Civic EX Coupe 2-Door 1.6L 1590CC 97Cu. In. l4 GAS SOHC Naturally Aspirated
1998 Honda Civic EX Sedan 4-Door 1.6L 1590CC 97Cu. In. l4 GAS SOHC Naturally Aspirated
1998 Honda Civic HX Coupe 2-Door 1.6L 1590CC l4 GAS SOHC Naturally Aspirated
1997 Honda Civic EX Coupe 2-Door 1.6L 1590CC 97Cu. In. l4 GAS SOHC Naturally Aspirated
1997 Honda Civic EX Sedan 4-Door 1.6L 1590CC 97Cu. In. l4 GAS SOHC Naturally Aspirated
1997 Honda Civic HX Coupe 2-Door 1.6L 1590CC l4 GAS SOHC Naturally Aspirated
1996 Honda Civic EX Coupe 2-Door 1.6L 1590CC 97Cu. In. l4 GAS SOHC Naturally Aspirated
1996 Honda Civic EX Sedan 4-Door 1.6L 1590CC 97Cu. In. l4 GAS SOHC Naturally Aspirated
1996 Honda Civic HX Coupe 2-Door 1.6L 1590CC l4 GAS SOHC Naturally Aspirated
Brand New 1996-1998 Honda Civic Blue Filter Cold Air Intake + Black Short Arm Sock. K2 Motor's cold air intake will help improve air flow to the engine. Our cold air intake system is design to allow maximum and denser air to enter your intake manifold. The result of colder air outside of the engine bay that is denser help improves airflow, quality comparable to OEM intake box. Our cold air intake is estimate to gain 15-20 horsepower for your cars or trucks. It includes all mounting hardware, vacuum hoses and stainless steel air filter (instruction not included). This combo includes Spec-D Tuning's Black Intake Pipe Sock. These Pipe socks will work with your Intake to prevent unwanted engine heat into your intake piping that can improve the performance of your aftermarket intake. Professional installation recommended.
For UPS Next Day,
UPS 2nd Day Air and
UPS 3 Day Select shipping options,
all purchases made before 2:00PM PST will be shipped the same day.
Any purchases made after the stated time will be processed and shipped the following business day.
(This does not apply to brand name products)
No Videos Available.
RETURNS & EXCHANGES - Our Policies and Promises to Our Customers.
30-Days Money Back Guaranteed:
We offer a 30 days money back warranty. If a customer is not satisfied with the product or order for an reason within 30 days of the initial purchase date, the customer may contact our customer service department to request a Return Merchandise Authorization (RMA) application.
Once we approve the RMA for your order, an RMA case number is issued and the customer may return the item for a full refund of the item price only.
All returned item(s) must be in new condition in order to be approved by our RMA department. If it is determined by our RMA department that the item is in "New Condition" then the refund will be processed.
90-Days Limited Warranty:
We offer a 90 day limited warranty on any item(s) that confirm to be defective within 90 days from the initial purchase date. This warranty will only be applied to exchanges only; therefore no refunds will be covered under this warranty. All cases are authorized upon the discretion of our RMA department.
Our Returns Merchandise Authorization (RMA) department reserves the right to reject any returns or exchanges for any item(s) returned past 90 days.
How do I return an item(s) that I purchased?
*Due to the nature of our products use, we usually do not accept returns but exceptions may be considered on a case-by-case basis. We advise that all customers consider the following before an RMA form is submitted.
All returns will be inspected and approved by our RMA department.
We require that all returns are shipped back in its original packaging. Any item(s) that are not returned in its original packaging is subject to a 20% restocking fee.
Any returned item(s) not found to be defective, damaged, and/or in any claimed condition will be subject to a 20% restocking fee of the item(s) price.
Customers are responsible for any return shipping fees.
We do not accept Cash on Delivery (COD) returns at this time.
What do I do if I received an incorrect product(s)?
As a result of a large volume of shipments from our facility, we apologize if you receive an item(s) that you did not order and/or pay for. If such an event arises, please contact us so we can send a return authorization with a return label to you at no charge.
In order to process the exchange in the best interest to both parties, we must receive the incorrect item prior to processing the exchange.
If a suitable exchange cannot be made within a span of three weeks, we will gladly issue a full refund.
What can I do if my purchased item(s) are defective?
If your purchased item(s) do not fit properly and/or function properly, we will gladly replace it at no additional charge.
Please contact our customer service department for assistance in obtaining an RMA case number.